Leprecon LP-X24 Manual v3.2 - Manual (Page 112)

108 Chapter Five Advanced Programming and Editing Techniques
LP-X24 and LP-X48 Users Manual
Edit Mode
playback & stack select buttons.
Please select a scene to edit using the
2. Press the Select button for the playback repeatedly until you reach the look you
want to copy.
The LP-X displays information for that look of the playback. The LP-X outputs the
look to the Programmer Fader.
3. Switch to Record mode.
4. Copy the look to a new location by pressing the Select button for the desired page
and playback.
The LP-X "copies" the look to the next available step on the playback.
The amount of material that is copied depends upon your Filter setting. With Dim
selected, only conventional light information is copied. With ML selected, only
moving light information is copied. With Both selected, all information for the look is
copied.
Copying a Playback
Use this procedure to copy all scenes from one Page/Playback to another.
To Copy a Playback
1. Put the board into Edit/Playback mode.