LSC Lighting iPatch - Manual (Page 7)

LSC Lighting Systems (Aust) Pty Ltd Page 6
iPATCH Installation guide
3.0 Using the Test circuit
The iPATCH has an integrated test circuit built into the chassis. This circuit can be used to
verify new installation wiring and test individual fixture loads.
Warning – The test circuit is
rated for a maximum load of 10 Amps.
1. Make sure the load circuit breaker is switched “off”.
2. Plug the chosen circuit lead into the test socket.
3. Switch the load circuit breaker to the “on” position.
4. The load current will be displayed on the ammeter.
Truss mounted iPATCH