Luxi Electronics DIY-28DS10 - Manual (Page 6)

Website:
www.luxielectronics.com
Email: [email protected]
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual regular wires Revision: 2.00 Date: 1/26/2015
US patents: 8002572, 8500489 issued; additional patents issued or pending in multiple countries
3.2 Use your fingers to press the wire holders
into the connector core half way
3.3 Insert the connector core with both wire
holders all the way into No. 2 hole of the
hand tool and perform crimp
3.4 Slide the connector core into the top metal
shell, push up with your thumbnail until you
hear or feel a click
3.5 Place the bottom metal shell onto the top
metal shell, line up the 4 notches, push
together until you hear or feel clicks
3.6 Use the finger tips to gently bend the strain
relief tabs inward; be careful not to be cut
3.7 Use the hand tool’s No. 3 dies to crimp the
strain relief tabs onto the cable jacket with
regular wires; make sure it’s a tight crimp