Marantz NA8005 User Manual
Page 72
6
Press POWER X.
0
When the unit power is turned on, the PC automatically finds and
connects to the unit.
7
Press USB-DAC to change the input source to “USB-
DAC”.
8
Checking the installed driver.
A Click the “Start” button and click “Control Panel” on the PC.
0
The control panel setting list is displayed.
B Click the “Sound” icon.
0
The sound menu window is displayed.
C Check that there is a checkmark next to “Default Device” under in
“Digital Audio Interface” of the “Playback” tab.
0
When there is a checkmark for a different device, click
“Marantz USB Audio” and “Set Default”.
9
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A Select “Digital Audio Interface” and click “Properties”.
0
The Digital Audio Interface Properties window is displayed.
.
#RRN[
%CPEGN
1-
Properties
Select a playback device below to modify its settings
㧦
&KIKVCN#WFKQ+PVGTHCEG
/CTCPV\75$#WFKQ
&GHCWNV&GXKEG
5RGCMGTU
4GCF[
Sound
Configure
Set Default
Playback Recording
Communications
Sounds
q
72