Desa JOURNEYMAN HD-9240 - Manual (Page 8)

-8- 595-5631-07
Finish Mounting
❒
Align the JourneyMan ® base plate, gasket, and
the junction box holes. Secure with mounting
screws that fit your junction box.
❒
If not installed on a weatherproof box or if the
adaptor plate was used, caulk between the
base plate and mounting surface with sili-
cone weather sealant.
To avoid water damage
and electrical shock, keep
lamp holders aimed below
horizontal.
Specifications
Range . . . . . . . . . . . . . . Up to 100 feet (30.5 m) with
Range Boost On; up to 70
feet (21 m) with Range
Boost Off. (Varies with sur-
rounding temperature).
Sensing Angle . . . . . . . . Up to 270 °
Fixture Load . . . . . . . . . Up to 300 Watts Maximum,
Incandescent (Up to 150 Watts
Maximum each lamp holder)
Sensor Load Capacity . . Up to 1000 Watts (8.3 amps)
Maximum, Incandescent
Power Requirements . . . 120 VAC, 60 Hz
Operating Modes . . . . . TEST, AUTO and MANUAL
OVERRIDE
Time Delay . . . . . . . . . . 1 , 5, 20 minutes
Sensitivity . . . . . . . . . . . Adjustable
DESA Specialty Products™ reserves the right to
discontinue products and to change specifications
at any time without incurring any obligation to in-
corporate new features in products previously sold.