DiBoss LCD-TV LT-40H6MVH - Manual (Page 18)

17
Basic Operation Basic Operation
Program selection
You can select a Program number with the CH x x/CHy y button or
NUMBER buttons.
Volume adjustment
Press the VOLП П/VOLq q button to adjust the sound level.
Q.VIEW
Press the Q.VIEW button to view the last program you were
watching.
Sound mute function
Press the MUTE button. The sound is switched off and the mute
display appears.
To cancel mute mode, press the MUTE button again, VOLП
П/VOLq q,
SAP or SOUND( ) button.
Standby Setup: The AC power cord must be set up and connected
to have the TV in standby mode ready to be turned on. Press the
ON/OFF button on the front panel of the TV to go into standby
mode.
1 If the TV is in standby mode, press the POWER button on the
remote controller or the TV itself to turn the TV on.
2 Press the POWER button again on the remote controller or
the TV itself to turn the TV off.
Turning the TV On and Off
If the TV is on and the POWER button is pressed
to turn the TV off, the TV goes into standby mode.
Note