Trouble shooting and specification, Problem remedy – Drive Medical Design Odyssey Mobility Scooter User Manual

Page 25

Advertising
background image

25

TROUBLE SHOOTING AND SPECIFICATION

PROBLEM REMEDY

SCOOTER WILL NOT
SWITCH ON

THE SCOOTER
SWITCHES ON, BUT THE
SCOOTER WILL NOT
MOVE.

THE SCOOTER APPEARS
SLOW

THE SEAT TURNS WHEN
IN OPERATION

THE HANDLEBAR
APPEARS LOOSE

INVOLUNTARILY HORN
SOUNDS

• Try recharging the battery
• Check the fuse and circuit breaker in the scooter

• Ensure there is enough power in the batteries. If not,
recharge the batteries.
• Ensure the freewheel lever is engaged in the ‘DRIVE’
position.

• Check the battery power level and recharge
• Check the speed dial is not set to slow.

• Slowly rotate the seat until it drops in to place and is
secure

• Tighten the height adjustment handle to secure the
handlebar

• Ensure that the wigwag paddle is released.
• Switch the scooter off and on.
• Recharge the batteries.
• If problem persists contact an authorized Drive dealer.

• If you cannot solve the problem by yourself, contact your dealer for help.

TROUBLE SHOOTING AND SPECIFICATION

You can inspect the following before taking you scooter to the dealer.

Advertising