Temperature display – Q3 Innovations AlcoHAWK PT750 User Manual

Page 12

Advertising
background image

10

Test Counter
This menu shows the number of direct sample tests performed on the

unit and the date the last calibration was performed. See Calibration

(pg. 13) for benefits of this feature.
User ID
This menu allows you to set an ID for the unit and a contact telephone

number. Use the MENU to switch between the ID and telephone num-

ber. Press the SELECT button to modify the data. Enter the password

using the MENU button to modify the character and press the SELECT

button to save the character and move to the next. Once you have

entered the last character of the password press the SELECT button.

If the correct password is entered you will be able to change the data

using the same method as entering a password.
New Password
To set a new password you must first enter the unit’s old password, en-

ter a new password, and confirm the new password by entering it again.

Enter passwords using the MENU button to modify the character and

press the SELECT button to save the character and move to the next.

Once you have entered the last character of the password press the

SELECT button to submit it. The password may contain any combina-

tion of letters and numbers (A-Z, 0-9).

TEMPERATURE DISPLAY

The room temperature is displayed in the top left corner of the unit.

The temperature display range is within -50°C to +50°C. As only two

digits are shown, a minus sign will not be displayed if the temperature

is a double-digit negative temperature. The true temperature must be

judged by the user’s senses.

Advertising
This manual is related to the following products: