Duracell DRCHCAM - Manual (Page 13)

11 11 2 2
3. Attach your battery onto the base charger unit or onto the appropriate adapter plate
and make sure the battery contacts connect with the contact pins. Make sure that the
latching on your battery slides completely under the tabs on the charger plate. If the
battery is properly connected, the red charging light (CHG) will light up, indicating that
the battery is charging. If the red charging light does not turn on, remove the
barrel-plug from the back of the charger then re-insert the plug. To ensure that the
battery and the charger are properly connected, remove the battery from the charger
and reattach. The red charging light will indicate the battery is properly attached and
being charged.
Video instructions detailing proper installation of your battery onto the adapter
plate can be viewed at www.DuracellDirect.com/support/DRCHCAM.
4. When the green indicator light (FULL) is lit, the battery is fully charged (Fig E).
5. In order to maximize the capacity of NiMH and NiCad batteries they should be
occasionally discharged. This can easily be done with the charger’s discharge
function. Place the battery on the charger and press the large black button on the
face of the charger base (Fig F). The battery will begin discharging, and this will be
indicated by the yellow light (DIS) turning on. After the battery is fully discharged, it
will automatically switch to charge mode until it is completely charged.
6. To remove the adapter plate from base charger unit, push down on the top of the
plate (Fig G) while sliding the plate to the left (Fig H).
Fig G Fig H
Fig E
Fig F
Canon BP-711, BP-714, BP-718, BP-722, BP-729, BP-E77 Base
Canon
BP-608, BP-608A, BP-617, BP-911, BP-911K, BP-914, BP-915,
BP-915L, BP-924, BP-927, BP-930, BP-930R, BP-941, BP-945,
BP-950G, BP-970G
P0265
Canon D850862201, D850942201, D850972201 P0265
Duracell DR10, DR10RES Base
Duracell
DR2, DR3, DR9607, DR9669, DRC915RES, DRC930RES,
DRC941RES, DRP120RES, DRP140RES, DRP220RES,
DRP602RES, DRP70RES, DRSG110RES, DRSG160RES
P0265
Energizer CCM5260-M Base
Energizer
ER-C515, ER-C530, ER-C535, ER-C560, ER-C630, ER-C680,
ER-C685, ER-C690, ER-C695, ER-D750
P0265
GE 1CVA157C, 1CVA158C Base
GE AV-608 Base
Hitachi
DZ-BP07S, DZ-BP14, DZ-BP14R, DZ-BP14S, DZ-BP14SJ,
DZ-BP14SW, DZ-BP16, DZ-BP21SJ, DZ-BP28, DZ-BP7S,
DZ-BP7SW
P0265
Hitachi VM-BP82, VM-BP82A, VM-BP83, VM-BP84, VM-BP84A Base
JVC AP-V134 Base
JVC
BN-50U, BN-V10U, BN-V11U, BN-V12, BN-V12U, BN-V140U,
BN-V14U, BN-V18U, BN-V20, BN-V20U, BN-V20U, BN-V22,
BN-V22U, BN-V25U, BN-V400, BN-V400B, BN-V400U, BN-V60U
Base
Kodak 1236199, 4E6420, DLKA-14, PRO-14N P0266
Leica BP-DC1, BP-DC3 P0265
Magnavox V80115BK01, V80116BK01 Base
Maxell DC7460 P0265
Maxell M6018 Base
Maxell M7205CL, M7206, M7220, M7260 P0265
Minolta CVP-16, VBP-600, VBP-601, VBP-630 Base
Panasonic BN-V18U, BN-V24U, BN-V25U Base
Panasonic
CGA-DU06A/1B, CGA-DU07A/1B, CGA-DU07E/1B, CGA-DU12,
CGA-DU12A/1B, CGA-DU14A/1B, CGA-DU14E/1B,
CGA-DU21A/1B, CGA-DU21E/1B, CGP-D16A/1B, CGP-D210,
CGP-D220, CGP-D28, CGP-D28A/1A, CGP-D28A/1B,
CGP-D53A/1B, CGR-220A/1B, CGR-D07S, CGR-D08, CGR-D08A/1B,
CGR-D08R, CGR-D08S, CGR-D120, CGR-D120A/1B, CGR-D16,
CGR-D16A/1A, CGR-D16A/1B, CGR-D16S, CGR-D210,
CGR-D220, CGR-D220A/1B, CGR-D28A/1B, CGR-D320, CGR-D54S,
CGR-D815, CGR-D815/A, CGR-D815A, CGR-D815A/1B,
CGR-DU06, CGR-DU06A/1B, CGR-S602A, CGR-S602A/1B,
CGR-S602SE, CGR-S602SE/1B
P0265
Panasonic DMW-BL14 P0265
Panasonic
HHR-V20A/1B, HHR-V20A1, HHR-V214A/K, HHR-V40A/1B,
HHR-V60A/1B, HHR-V60A1
Base
Panasonic
PV-214, PV-215, PV-251, PV-611, PV-611A, PV-BP15, PV-BP17,
PV-BP18
Base
Panasonic PV-BP8, PV-DBP8, PV-DBP8A, PV-DBP9A P0265
Manufacturer Manufacturer Battery No. Plate No.
Compatible Batteries
I-DRCHCAM_manual_233x180mm_20080731:I-DRCHCAM 7/31/2008 3:58 PM Page 4