Datalogic Scanning CBX500 - Manual (Page 4)

CBX500 INSTALLATION MANUAL
4
DESCRIPTION
The CBX500 is a connection box which can be used as an accessory to facilitate system connections for
installation and device replacement of several Datalogic family reading devices.
System cabling is made through spring clamp terminal blocks inside the CBX500 while the reading device is
connected to the CBX500 through a 25-pin connector on the housing.
A 9-pin connector placed inside the CBX500 facilitates connection between an external PC and the auxiliary serial
interface of the reading device for configuration or data monitoring.
CBX500 can also house several accessories which make the system highly flexible. These include:
• Backup Module - to backup and restore system configuration parameters making system maintenance
extremely quick and easy.
• Display Module – to show reading device menu and diagnostic messages at the CBX500.
• Several Host Interface Modules - to interface the scanner with the most popular Fieldbus
network types: Ethernet, Profibus; DeviceNet, etc., including IP65 protection versions.
• Mounting Adapters – to provide easy mounting to DIN rails and Bosch profiles.
ACCESSORIES
The following accessories are available on request for the CBX500:
Name Description Part Number
BM100 Backup Module 93ACC1808
BM150 Display Module 93ACC1809
BM300/310 Profibus Module STD/IP65 93ACC1810, 93ACC1811
BM400 DeviceNet Module IP65 93ACC1814
BM500/510/520 Ethernet/IP Module STD/IP65/IP54 93ACC1812, 93ACC1813, 93ACC1840
BM600 CANopen Module STD 93ACC1815
BM700 Profinet Module STD 93ACC1816
BM1100 CC-Link Module STD 93ACC1845
BM1200/1210 Modbus TCP STD/IP65 93ACC1848, 93ACC1849
BA100 DIN Rail Adapters 93ACC1821
BA200 Bosch Adapters 93ACC1822
BA900 Two Cable Glands Panel 93ACC1847
SAFETY PRECAUTIONS
ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT
POWER SUPPLY
This product is intended to be installed by Qualified Personnel only.
This device is intended to be supplied by a UL Listed NEC Class 2 power source.
CAUTION
Total power consumption is given by adding the CBX500 power consumption to that of all the
devices powered through the CBX500 (reading device, P.S., I/O). Refer to the manual of the
connected devices for details about minimum/maximum supply voltage and power
consumption.
Each CBX500 supports only 1 single reading device + system accessories.