Silvestri 7092K - Manual

Connection Cable with Hasselblad H3D2 series back
Instructions
silvestri
Code: 7092K
Connect the jack 2,5 (silver coloured) to the Sync In of the H3DII back and the e
il jack 3,5 (gold coloured) to the Sync Out of the H3DII back.
Select Hasselblad H3DII mode from the menu in the Remote control unit (code
D7020K).
In case the firmware of the DRCU has not been updated, select the Leaf Sync or
Phase One 2 mode.
On the sofware for acquisition or on the back's menu, select the Camera interface:
Pinhole.
Via Della Gora 13/5 - 50025 Montespertoli FI, Italy
e.mail [email protected] - www.silvestricamera.com
Tel +39.0571.675049 Fax +39.0571.675919
silvestri