Q-See QSDL503AD - Manual (Page 6)

QSDL503AD USER MANUAL
4 | P a g e
(Picture 6) (Picture 5)
4.5:
Magnetic Code Controller
1. Remove the battery compartment cover on the front of the Magnetic Code Controller (Picture 5), insert
3 “AA” alkaline batteries and replace the battery compartment cover.
2. Decide on the location you would like to attach your Magnetic Code Controller. It is recommended to
use a door that is central to your home and in an area that is easy for you to access.
3. Attach the Magnetic Code Controller to the door molding using heavy duty double-sided adhesive tape
or mount it down using a small size screw.
4. Peel the protective film off the double sided tape on the back of the Magnetic Sensor (Picture 5) and
affix it to the edge of the door. Make sure to align the Magnetic Code Controller and Magnetic Sensor
so that they are no more than 10mm (1/3”) apart as illustrated in Picture 6.
Distance
Cannot be
Greater
than 10mm
(1/3”)