Teletronics 2.4GHz 1 Watt SmartAmp - Manual (Page 8)

Page 7
6. DC Power Injector Connections, Indicators and labels:
The DC injector injects DC power into the RF cable and the power is carried to the amplifier
with the RF signal.
“To Radio” Connection:
This “N” Female connector is connected to the radio modem via a short jumper RF cable.
“To Amplifier” Connection:
This “N” Female connector connects to the amplifier on the mast via the transmission
cable.
LED: Green LED indicates DC power on.
DC Power Supply:
The power supply provided with the unit is universal type, 110/220 V AC to 9 VDC
converter. This has been tested for quality and performance. If a different 9V DC adapter
has to be used make sure it is provided with center positive 2.5mm jack and minimum of
1.2 Amp rated capacity.
7. Amplifier Connections, Indicators and Labels:
“TO DC Injector” Connection:
This “N” Female connector is connected to the DC Power Injector via the transmission
cable.
“TO Antenna” Connection:
This “N” Female connector connects to the antenna with a short length of coax cable.
LED:
This LED indicates three states:
1. Green
= Transmit
2. Red = Receive
3. Orange = High speed Tx / Rx switching