Vir2 Instruments MOJO User Manual
Page 15
11
The Kontakt window will appear, and a MIDI track will be created,
transmitting to Kontakt’s MIDI channel A-1. When it is record-en-
abled, it will send any incoming MIDI played on your controller
into Kontakt.
At this point, you can skip down in the instructions
to the Getting Started With MOJO section below.
USING KONTAKT AS AN RTAS PLUG-IN IN PRO TOOLS
Users of Digidesign’s Pro Tools (M-Powered, LE, or TDM) can use
Kontakt as an RTAS plug-in. These instructions have been pre-
pared in Pro Tools 8, although Kontakt may also work in earlier
versions if the computer meets the system requirements. Once
the project is open, go to the Track menu and choose New...
> [
06
]
In the dialog box that appears, choose the appropriate options,
such as the following: create 1 new stereo Instrument Track in
samples. Then click Create.
> [
07
]
Go to the Mix window and look at the channel strip for the instru-
ment. At the very top is an area for Inserts A-E. Shown in
> [
08
]
Click on the first of the five slots, and navigate through the popup
menu to choose multichannel plug-in > Instrument > Kontakt 3.
Shown in image
> [
09
]
06
07
09
08