Visara 5350 Quick Start - Manual (Page 15)

Quick Start Guide Chapter 2 Setting Up Your Printer
11
EN
GLIS
H
2 Take the Toner Cartridge out of
the box and shake it 7 to 8 times
as shown in the diagram.
3 Place the Toner Cartridge on a
flat surface and pull the seal out
horizontally.
When pulling out the seal, pull it out horizontally. The tape might break if it is pulled
out diagonally. After the seal has been pulled out, do not shake or bump the Toner
Cartridge.
4 Hold the Toner Cartridge by the
grip and insert it into the slot
inside the printer.
9035 Quick Start Guide-en.book Seite 11 Donnerstag, 9. November 2006 3:12 15