VMC VM-3 - Manual (Page 18)

VMC • Page 16
.
Installing the DV Pro Media
Player Video Package
1. Unpack the DV Pro Media Player and place it
on top of the VM-3 where you can have easy
access to the rear panels (as shown). Turn on
the VM-3 by plugging in the black power cable.
2. Find the Interface (Black) Cable. Insert the 9-
pin end into the Comm A Port on the VM-3 and
the Mini Plug end into the RS 232 jack on the DV
Pro Media Player.
3. For audio, insert one end of the RCA cable
(provided) into the audio out (Red jack for
mono) on the Player as shown. For stereo use
two RCA cables. Insert the other end(s) of this
cable into the audio-in(s) of a TV, amplifier or an
RF modulator.
4. Attach the BNC end of one of the black Video
Cables to the Video (in) plug on the VM-3. The
other end of this cable is a standard RCA plug.
Insert this end into the back of the Player. Look
for a yellow jack marked "Composite”.
5. Attach the BNC end of the other black Video
Cable to the Video (out) plug on the VM-3
(marked Edit). The other end of this cable is a
standard RCA plug and can be inserted into an
edit monitor or other video display. Using this
plug allows the user to edit off line.
4.
4.
3.
2.
2.
1.
The instruction step numbers correspond to the numbers in the illustrations to the right.
5.