Vuzix STAR 1200XLD AR System User Guide - Manual (Page 17)

17
The nose bridge assembly is adjustable. It can be slid in or out to adjust its length and the
nose pad wires can be bent for adjustment, like the pads on many prescription eyeglasses.
§ Slide the nose pad assembly in or out to adjust the display height of your eyewear. The
eyewear displays should be aligned to the same level as your eyes.
§ Bend the nose pad wires to adjust the pad separation and angle for a comfortable fit.
Tip: If the stem pulls completely out, simply slip it back into its slot taking care that the serrated strip
faces toward you – away from the eyewear display assembly.
Note: Just as is the case with prescription eyeglasses, the wire arms of the nose pads are designed
for adjustment for a single user. Excessive and/or frequent adjustment or sharp bends in the
wire arms may weaken and break them. Replacement nose pads are available from Vuzix.
For active applications, a tether strap can be used to provide a more secure fit.
§ Attached each end of the tether strap to the eyelets on the eyewear temples.
§ Adjust the strap synch for a comfortable and secure fit.
The final adjustment is the calibration of the head tracker for use on a Windows based
host device.
Tip: If you are not using a Windows based host device or are not using the head tracker, you can
bypass this step.
Tracker calibration requires the installation of the Windows application, VR Manager.
This software application is included in the STAR 1200XLD software and
documentation package downloaded from
www.vuxiz.com/dd .