ZeeVee ZvCli User Manual User Manual
Page 30
Zv‐Cli v1_3 www.zeevee.com
Page
30 of 32
Restart Video Processing
This command tells ZvBox to completely restart all video processing. The broadcast will temporarily stop, and
will resume when the restart completes. This command is *required* after making changes to some of the
MPEG2 settings (e.g. program number or starting pid number).
Syntax
system restart
Identifying Physical ZvBox
This command tells ZvBox to flash its LEDs so that an individual unit can be identified among several in a rack.
The ZvBox‐150 will flash its front panel LED between blue and amber for 10 seconds. The ZvPro‐250 will flash all
of its LEDs (except the power LED, which will remain on solid) on and off for 10 seconds. This command makes it
easy to identify which unit is being managed by this ZvCli.
Syntax
system identify