Airaid 200-186 User Manual

A. b. installation instructions

Advertising
background image

1. Disconnect the negative battery cable.
Using a 5/16” socket, remove one bolt on the top
of the beauty cover. Set the bolt and the cover
aside for re-installation later.

2. A.) Loosen the hose clamps on both ends of
the factory intake tube. B.) Next loosen the hose
clamp on the Mass Air Flow sensor where it
clamps on the factory airbox.

3. Using a screwdriver, pry the factory tube away
from the plastic clamp on the radiator hose, and
remove the tube.

4. Without disconnecting the electrical con-
nector, remove the Mass Air Flow sensor from
the factory airbox, and set it aside.

5. Grab the factory airbox and rock it back and
forth, and remove it from the vehicle. It is only
held in by grommets, no bolts.

6. Remove 5 bolts and remove the factory airbox
mounting plate.

7. Assemble the two Cool Air Dam panels (#2)
and (#3) using the five supplied screws (#12),
washers (#13), and nuts (#14), as shown.

8. Install the filter adapter (#5) into the CAD us-
ing three button head bolts (#9), and washers
(#10).

9. Install the assembled CAD in place of the
factory airbox using four bolts (#11) and wash-
ers (#10). Do not over tighten the bolts. Install
the rubber trim (#17) as shown at the arrow.

A.

B.

Installation Instructions

For Part Numbers:

200-186

700-469 Airaid Oiled Media Filter

201-186

701-469 SynthaMax Dry Media Filter - Red

202-186

702-469 SynthaMax Dry Media Filter - Black

203-186

703-469 SynthaMax Dry Media Filter - Blue

2006 Chevrolet Silverado 1500
2007 Chevrolet Silverado Classic
1500/1500HD/2500HD/3500
4.8L V8, 5.3L V8, 6.0L V8
With Electric Cooling Fan & High Profile Hood

Component Identification

1.

Airaid Premium Filter

1

2. MAF Panel Coated

1

3. Rear Air Dam Coated

1

4. Modular Intake Tube

1

5. Black Filter Adapter

1

6. Urethane Hump Hose

1

7. Urethane Coupler

1

8. Weather Strip 21”

1

9.

1/4”-20x1/2” SS Button Head

3

10.

1/4” Flat Washer

7

11.

M6x1x25 Hex Bolt

4

12.

6-32 x 5/16” Screw

5

13.

#6 Flat Washer

5

14.

6-32 Keps Nut

5

15.

#60 Hose Clamp

2

16.

#64 Hose Clamp

2

17.

Rubber Trim 7”

1

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

Advertising
This manual is related to the following products: