Airaid 200-285 User Manual

Installation instructions, Component identification

Advertising
background image

Installation Instructions

For Part Numbers :

200-285

720-472 Airaid Oiled Media Filter

201-285

721-472 SynthaMax Dry Media Filter - Red

202-285

722-472 SynthaMax Dry Media Filter - Black

203-285

723-472 SynthaMax Dry Media Filter - Blue

2014-15 Chevrolet Silverado 1500/ GMC Sierra
2015 Chevrolet Tahoe/ GMC Yukon
2015 Chevrolet Suburban 1500
5.3L V8

2. Using an open end wrench, remove the passenger
side fender brace and set it aside. For ease of installa-
tion, remove the rear brace bolt and set it aside. Un-
plug the Mass Air Flow sensor, or MAF and un anchor
it from the airbox. Unseat the airbox from it’s mounting
grommets and remove the factory airbox.

3. Remove the 4 bolts in the airbox mounting tray and set
them aside. They will be reused in step 5. Remove the
Tray, it will not be re used.

4. Install the Filter Adapter onto the Cold Air Box as
shown using the three 1/4-20 Button Head Screws (#15)
and 1/4” Flat Washers (#16).

5. Slide the Airbox assembly into the inner fender area
and secure it using 3 of the OEM bolts removed in step
3.

6. Install the Barbed Fitting and Elbow (#s 13 and 14)
into the Airaid Intake Tube as shown.

8. Slide the Hump Hose with the #68 Hose Clamps
onto the Filter adapter and the coupler and the #56
Clamps onto the throttle body. Leave the clamps loose
for now.

7. Transfer the Mass Air Flow sensor from the factory
airbox into the Airaid Intake Tube. Secure the sensor
using the two 8-32 Button Head Screws (#17).

Do Not Use Factory Hardware !

9. Install the Airaid Intake Tube into the Hump Hose and
couplers. Adjust for fit and tighten all four Hose Clamps.

Component Identification

1. Airaid Premium Filter

1

2. Airaid Intake Tube

1

3. Cold Air Box

1

4. Filter Adapter

1

5. Silicone Hump Hose

1

6. Silicone Coupler

1

7. 5/8" x 12” Breather Hose

1

8. 5/8" x 9.5" Breather Hose

1

9. Weather strip 25 1/2”

1

10. #68 Hose Clamp

2

11. #56 Hose Clamp

2

12. #19 Speed Clamp

4

13. 3/8" NPT x 5/8" Barb Elbow

1

14. 3/8" NPT x 5/8" Barb Fitting

1

15. ¼-20 x 1/2” Button Head Screw

3

16. 1/4” Flat Washer

3

17. #8-32 x ½” Button Head Screw

2

18. Quick Connect Fitting

2

1.Disconnect The Negative Battery Terminal!
A. Depress the Grey locking tabs in the PCV breather
quick connect fittings and remove them from the vehi-
cle.
B. Loosen the clamps on the factory intake assembly
and remove it from the vehicle.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

A

B

Fender Brace

MAF

Elbow

Fitting

#68 Clamps

#56Clamps

Rear Brace

Advertising
This manual is related to the following products: