Airaid 300-138 - Manual

Installation Instructions
For Part Numbers:
300-138 720-431 Airaid Oiled Media Filter
301-138 721-431 SynthaMax Dry Media Filter - Red
302-138 722-431 SynthaMax Dry Media Filter - Black
303-138 723-431 SynthaMax Dry Media Filter - Blue
2003-05 Chrysler PT Cruiser
Turbo 2.4L I4
Component Identification
1. Airaid Premium Filter 1
2. Front Panel Coated 1
3. MAF Panel Coated 1
4. Weather Strip 29 ½” 1
5. 6-32 Screw 4
6. 6-32 Keps Nut 4
7. #6 Flat Washer 4
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
1) DISCONNECT NEGATIVE (-) BATTERY CABLE.
2) Remove the Factory Air Box Lid
A) Loosen the clamp on the factory intake tube at the air box lid. See Fig#1
B) Unclip the factory air box lid and remove from vehicle.
C) Extract the factory air filter box assembly. (Note: leave the base in place) See Fig#1
D) Unclip and remove the small intake tube attached to the factory air filter box. See Fig#2 & Fig #3
E) Replace the factory air filter box in its original place and re-connect the hose in its original location. See Fig#4
3) Assemble the Airaid Cool Air Dam
A) Assemble the two Airaid Cool Air Dam panels with the hardware provided. See Fig #5.
B) Position the assembled Airaid Cool Air Dam in place of the factory air box. Snap into place.
C) Connect the factory intake tube to the Airaid Cool Air Dam and fasten using the factory clamp. See Fig#6
D) Mount the Airaid premium filter to the Airaid Cool Air Dam & secure using the clamp provided. See Fig #6
E) Press the supplied weather strip onto the upper rim of the Airaid Cool Air Box. (Hint: for easy installation of weath
er seal, start on a corner) See Fig #6
4) Finishing Up
A) Check for any foreign objects or debris in the intake path.
B) Reconnect the negative battery cable & double-check your work.
Fig#1 Fig#2 Fig#3