Airaid 300-209 - Manual

Installation Instructions
For Part Numbers:
300-209
720-128 Airaid Oiled Media Filter
301-209 721-128 SynthaMax Dry Media Filter - Red
302-209 722-128 SynthaMax Dry Media Filter - Black
303-209 723-128 SynthaMax Dry Media Filter - Blue
2007-09 Dodge Ram 2500-5500
6.7L I6 Cummins Diesel
1. Disconnect the negative battery cables.
A) Using the supplied #20 Tor x bit, remove
two screws from the Mass Air Flow sensor, and
one screw from the temperature sensor. Remove
both sensors and the wiring harness anchor from
the airbox lid, and set them aside. C) Loosen the
hose clamp that holds the factory intake tube to
the airbox lid. 2. Unsnap the two metal clips that hold the airbox lid to
the base, and remove the lid. Next, remove the factory
paper air filter from the base.
3. Using a 10mm socket, remove the nut that
holds the front of the airbox base and grommet
assembly to the radiator support.
4. Gently rock the airbox base back and forth
while pulling up, to remove it from it’s mount-
ing grommets, and remove it from the vehicle. 5. Loosen the factory hose clamp at the base of
the factory plastic intake tube assembly, and
remove the tube from the vehicle. 6. Using a 13mm socket, remove the factory bolt
that holds the fan shroud to the radiator.
7. Remove the two factory rubber grommets
that held the factory airbox base in place. 8. Install the supplied well nut (#21) into the
support bracket hole that is closest to the fender. 9. A) Install the metal tube (#5) into the r ub-
ber elbow (#6) until the rolled bead touches the
side. B) Install one #80 hose clamp (#20)
around the elbow at the metal tube, and tighten.
C) Install the tube assembly into the factory
rubber elbow on the turbocharger. Leave the
factory hose clamp loose until final adjustments
are made.
Component Identification
1. Airaid Premium Filter 1
2. Airaid Filter Adapter 1
3. MAF Panel 1
4. Bottom Panel 1
5. Metal Tube 1
6. 4 1/2”x 90° Rubber Elbow 1
7. Weather Strip 24” 1
8. 6-32x5/16” Screw 7
9. #6 Flat Washer 7
10. 6-32 Keps Nut 7
11. 1/4-20 x 1/2” Button Head Bolt 4
12. 1/4” Flat Washer 5
13. 1/4” Serrated Nut 1
14. 8mm x 1.25 x 30mm Hex Bolt 1
15. 5/16” Flat Washer 1
16. 6mm x 1 x 12mm Hex Bolt 1
17. 8-32x1/2” Button Head Screw 3
18. 3/8-16 x1 1/4” Button Head Bolt 1
19. #193 Bracket 1
20. #80 Hose Clamp 2
21. Well Nut 1
22. T20 Torx Bit 1
A.
B.
A.
B.
C.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.