Airaid 310-178 - Manual

Installation Instructions
For Part Numbers :
310-178 700-458 Airaid Oiled Media Filter
311-178 701-458 SynthaMax Dry Media Filter - Red
312-178 702-458 SynthaMax Dry Media Filter - Black
313-178 703-458 SynthaMax Dry Media Filter - Blue
2005-2010 Jeep Grand Cherokee
5.7L V8 Hemi
2. Unhook the two air cleaner lid latches on front of
box. 3. Remove the air cleaner box lid by sliding it forward,
and then up, and out of the factory intake tube.
4. Remove factory air filter from air cleaner box. 5. Remove, and set aside the oil filler cap. Use caution
not to drop anything into engine while cap is off.
6. Carefully lift up on the engine cover (it is held in
place by grommets, no bolts) to access the hose
clamp on the throttle body, and 10mm bolt next to
the throttle body.
8. Carefully pull the resonator towards you and rotate
the bottom up to gain access to the tie wrap hold-
ing the breather hose to the rubber coupler. Cut
the tie wrap and discard.
7. A.) Loosen the hose clamp on the throttle body. B.)
With a 10mm socket, remove the bolt next to the
throttle body that holds the intake resonator in
place.
9. Slide the clip off of the resonator that holds the
breather tube in place.
1.Disconnect The Negative Battery Terminal!
Loosen the hose clamp on air cleaner box lid. Twist and
remove breather hose from air cleaner box lid.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
Component Identification
1. Airaid Premium Filter 1
2. Quick Fit Panel 1
3. Quick Fit Panel 1
4. Modular Intake Tube 1
5. Urethane Hump Hose 1
6. Urethane Coupler 1
7. Weather Strip 18” 1
8. #6 Flat Washer 4
9. 6-32 Keps Nut 4
10. 6-32 X 5/16” Screw 4
11. #60 Hose Clamp 4
12. Grommet 1
13. Speed Clamp 1
14. Nylon zip tie 1
B.
A.