H3C Technologies H3C S7500E Series Switches - Manual (Page 49)

2-20
Creating an HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create an HWTACACS scheme and enter HWTACACS scheme
view:
To do… Use the command… Remarks
Enter system view system-view —
Create an HWTACACS scheme
and enter HWTACACS scheme
view
hwtacacs scheme
hwtacacs-scheme-name
Required
Not defined by default
z Up to 16 HWTACACS schemes can be configured.
z A scheme can be deleted only when it is not referenced.
Specifying the HWTACACS authentication servers
Follow these steps to specify the HWTACACS authentication servers:
To do… Use the command… Remarks
Enter system view system-view —
Enter HWTACACS scheme
view
hwtacacs scheme
hwtacacs-scheme-name
—
Specify the primary
HWTACACS authentication
server
primary authentication ip-address
[ port-number ]
Specify the secondary
HWTACACS authentication
server
secondary authentication ip-address
[ port-number]
Required
Configure at least one
command.
No authentication server is
specified by default.