Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 158
144
[AC-wlan-st-2] quit
# Create an AP template named ap1, specify the AC model as WA2100 and AP 1 serial number
as 210235A29G007C000020.
[AC] wlan ap ap1 model WA2100
[AC-wlan-ap-ap1] serial-id 210235A29G007C000020
# Bind service template 2 to radio 1.
[AC-wlan-ap-ap1] radio 1 type dot11g
[AC-wlan-ap-ap1-radio-1] service-template 2
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] return
Verifying the configuration
# After a WLAN client passes authentication, display MAC authentication settings and statistics.
<AC>display mac-authentication interface WLAN-DBSS 0:9
MAC address authentication is enabled.
User name format is MAC address in lowercase, like xx-xx-xx-xx-xx-xx
Fixed username:mac
Fixed password:not configured
Offline detect period is 180s
Quiet period is 180s
Server response timeout value is 100s
The max allowed user number is 4096 per slot
Current user number amounts to 1
Current domain is 2000
Silent MAC User info:
MAC Addr From Port Port Index
WLAN-DBSS0:9 is link-up
MAC address authentication is enabled
Authenticate success: 1, failed: 0
Max number of on-line users is 4096
Current online user number is 1
MAC Addr Authenticate State Auth Index
00e0-fc12-3456 MAC_AUTHENTICATOR_SUCCESS 1301
# Display online user information.
<AC> display connection
Index=1301,Username=00-e0-fc-12-34-56@2000
MAC=00-E0-FC-L2-34-56
IP=N/A
IPv6=N/A
Total 1 connection(s) matched.
# Ping the FTP server from the client to verify that the ACL 3000 has been assigned to port WLAN-ESS
0 to deny access to the FTP server.
<AC> ping 10.0.0.1
PING 10.0.0.1: 56 data bytes, press CTRL_C to break
Request time out