Polaris 2013 BRUTUS Accessory Snow Blade - Manual (Page 30)

29
TROUBLESHOOTING
WARNING!
Instructions are necessary before operating or servicing machine. Read and understand the Owner’s Manual, Operator’s Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or service. Check for correct
function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death .
Chart
PROBLEM CAUSE CORRECTION
Snow blade does not mount
properly on the front mount
frame.
Attachment pin holes have debris in them. Remove debris from the pin holes.
Snow, ice or other debris lodged between the front
mount frame and the snow blade.
Remove debris from between front mount frame
and snow blade.
Worn or damaged parts. Replace worn or damaged parts.
Cannot change angle of snow
blade.
No hydraulic flow. Check quick coupler connections. Check for
damaged hose ends and fittings.
Cylinder shear bolt broken. Replace shear bolt.
Snow blade is hard to control. Skid shoes worn. Replace skid shoes.
Worn pins. Replace pins.
Too much down pressure on the blade. Lift to the proper height.
Uneven cutting edge wear. Turn buckle not properly adjusted. Adjust as required.