iHealth Wireless Blood Pressure Wrist Monitor - Manual (Page 3)

Measurement Procedures
Blood pressure can be affected by the position of the cuff and your physiologic condition. It is
very important that you keep your wrist at heart level.
1. Be seated with your feet flat on the floor without crossing your legs. Stay still during
measurement. Do not move your wrist, body, or the monitor.
2. Place your hand palm-side up in front of you and wrap the cuff around a bare wrist
1-2cm above the wrist joint. If the monitor is correctly placed, iHealth logo will be
facing upright.
3. The middle of the cuff should be at the level of the right atrium of your heart.
4. It is advised to place the monitor’s travel case under your arm for support and to keep
your arm at optimal height for measurement.
5. Adjust the height of your wrist, the App will detect your wrist position and the
measurement will start ONLY when the correct position is detected. Follow the
on-screen instructions to begin measurement.
Auto Connect Option
Auto connect option allows the monitor to find the last used iOS device and re-establish the
connection with your iOS device automatically. Auto connect option can be enabled in the
App. (Device Setting->Auto Connect->On)
Taking Measurements with Multiple iOS Devices