Invotel USB 120M - Manual (Page 2)

ii
Package Content:
USB 120M or USB 240M MP3 Digital Player unit
Power adapter 110v AC to 3-6V DC 100 to 200 ma
USB cord to connect the player to PC for file loading
“audio & power” cord 6 feet long with RCA male to connect to MOH port
RCA female to Mono male adapter plug
Earphone to monitor the playback
User’s Manual
Connecting to a Computer:
Step 1 Unplug the player from the “Audio & Power” cord, and turn it OFF:
Turning OFF: press and hold the ON/OFF button till status LED turns OFF
Step 2 Remove the USB cap and plug the player directly into your
computer’s USB port, or use the provided USB cable. Using the provided
USB cable allows updates without the need to bend over to reach the
PC USB port, you may tape the cable on your desk for future use.
The Status LED turns ON (the player uses the PC power at this time)
The player will be detected as “Removable Disk” when you open “My
Computer” or “Windows Explorer”
Transferring Files into Player:
Select the file you want to transfer to the player and drag-and-drop it into the
“Removable Disk” that represents this player (Right click on the file, Copy,
move the mouse to the “Removable Disk” , Right click there and Paste)
Make sure only one file is in the player. You can do this by transferring the file
from the player to your PC 1
st if you still want to keep it or just delete the file
before transferring the new file.
Keeping Multiple files in the USB 120M / USB 240M player:
You may keep up to 120 minutes (240 minutes in USB240M) of audio in the
player in multiple files, The player will play the active files only one by one
continuously,
Just make sure one file is active as follows:
Select the desired file, then Right click on it, Click on Properties, select or
remove Hidden, Apply , OK
for example: contents of “Removable Disk” is as follows:
Normal Production1.mp3
Normal production2.mp3
Holiday Production.mp3
Normal Production1.mp3
Normal production2.mp3
Holiday Production.mp3
Disconnecting from Computer:
1.
Double click on the green arrow in the Taskbar located on the lower -right
side of the computer screen(Safely Remove Hardware)
2. Select “USB Mass Storage Device” from the list that appears then click
“Stop”
then press “OK” , the Status LED turns OFF on the player.
3. When the “Safe to Remove Hardware” appears click OK and disconnect
the player from your PC. Put the cap back ON
Specifications:
File Formats MP3, WMA, MAC, etc.
Frequency response 20Hz to 20 KHz . less than 0.1% THD
Sampling rate >64kbps Mono ,128kbps recommended
PC Interface USB 2.0 Hi-Speed(MSC)
Memory Capacity 128MB 120 minutes (256MB 240 minutes on USB 240M)
Power supply: 110VAC 60 Hz. To 6 V DC 100-200ma
Size: 3.5” x 1.5 ” x 1” (L x W x H)
Color: Black Weight: 0.1 pounds (1/2 pounds with power supply)
P2
P3
The inactive files are grayed out ,
and will not play. They can stay in
the player
During the Holidays simply
activate the Holiday file (remove
Hidden selection in properties)
then inactivate the other
files(select Hidden in properties)
Do Not Disconnect the Player from USB
To hear the audio: After disconnecting the player from USB, you
may use the provided earphone to hear the audio playback before
connecting the player to your MOH jack, To do this connect the
earphone directly into Audio Out jack on the player, turn ON the
player, start the playback (Status LED blinking) There is enough power in
the player to let you play and hear the audio. Be sure to turn OFF player
before connecting power to it.