Lanner Rack Mount - Manual (Page 10)

Software User Manual Version 1.0
8
3.2 Installing the power adaptor to the system
Use the following procedures to mount the power adaptor.
1. Position the power adaptor alongside the system.
2. Fix the adaptor holder to the bracket (with the white, round-top short threaded
screws). Note that the power adaptor can be installed either to the right or left of the
system. Make sure that the AC socket will not be blocked by the bracket.
3.3 Installing the system onto the Rack
Use the following procedures to mount the system to the rack.
1. Position the rails alongside the system.
2. Attach the inner rails to the mounting brackets as shown in the following diagram.
3. Pull out the rack’s rail until the extension safety lock locks.