Lanner LEC-7070 - Manual (Page 12)

12
Board Layout
Chapter 3
Embedded and Industrial Computing
Connectors and Jumpers List
The tables below list the function of each of the board
jumpers and connectors by labels shown in the above
section. The next section in this chapter gives pin
definitions and instructions on setting jumpers.
Table 3.1 Connector List for LEB-7070 Board
Labels Function Pin Definition Refer-
ence Page
CMOS1 Clear CMOS Jumper P14
COM1/COM2 RS232 Serial Ports P13
DC_IN1 DC Power in P15
DIO1 Digital Input/Output P15
HDMI1 High-Definition Multimedia Interface Port P14
KB1 PS/2 Keyboard & Mouse Connector P15
LANB1/LANB2 Ethernet LAN Ports P14
LIN1 Line-out Audio Jack P13
LPC1 LPC Interface (for debug use only) Reserved for Factory Use
MIC1 Microphone-in Audio Jack P13
MPCIE1(with SIM1)/MPCIE2 (in
half length)
Mini-PCIe Connectors; MPCIE1(with SIM1 in full
length), MPCIE2 in half length
P15
PW_BTN2 Power Button with Phoenix Connector P15
PWR1 SATA HDD Power Connector P14
SC1T1/SC2T1 Select COM Port Pin 9 Function P13
SATA1 Serial-ATA Connector (SATA1)
SPI1 SPI ROM Interface(for debug use only) Reserved for Factory Use
USB1/USB2 USB Port 1-4 Connectors P14
VGA1 VGA Connector P14