Linkskey LKA-EDU2A - Manual (Page 3)

USER GUIDE for USB 2.0 IDE ENCLOSURE
3
Specifications
Model: USB2.0 2.5” External IDE Enclosure
Link Cable: USB “A Type (Male)” to “B Type(Male)”
Standards: Standard Specification of USB1.1 & USB2.0
Dimension: 158.75 x 78 x 15.5mm (2.5” HDD Enclosure)
EMI Compatibility: FCC Part 15, Class B CE mark, Commercial
LED: Power – Green LED / Active -- Red LED
Package Contents
Basic contents:
One U2 IDEHDD Enclosure (HDD Excluded)
One PS2/USB Y power cord
Switch AC power adapter 5V, 2.1A~2.5A, 1.3*3.5, 9.5mm (OPTION)
One USB A-Mini B Type Cable
One CD Driver with manual
Installation for USB2.0 IDE ENCLOSURE
Simply plug the USB2.0 IDE ENCLOSURE into the USB port of your computer. The computer will detect
this new hardware, and then please follow the steps below for easy driver installation.
Hardware Installations
2.5” HDD Enclosure
Step 1: Make the connection by plugging in one end of USB type A cable into the computer’s USB
port and the other end of the cable into the 2.5” HDD Enclosure USB receptacle.
Step 2: Plug the power cable in 2.5” HDD Enclosure power jack .
Step 3: turn on power button.
** To remove the Hard Drive, please repeat procedures Step 1 through Step 3 but in contrariwise
sequence.
POWER Cord