Meter bridge (cl-meter) – Logitek Electronic Systems Mosaic User Manual

Page 13

Advertising
background image

Logitek Mosaic Reference Manual
Page 13

M2

M2

M2

M2----F12 12 Slot Frame

F12 12 Slot Frame

F12 12 Slot Frame

F12 12 Slot Frame

17.55 inches (445.77 mm) wide

M2

M2

M2

M2----F18

F18

F18

F18 18 Slot Frame

18 Slot Frame

18 Slot Frame

18 Slot Frame

25.95 inches (659.13 mm) wide

M2

M2

M2

M2----F22 22 Slot

F22 22 Slot

F22 22 Slot

F22 22 Slot Frame

Frame

Frame

Frame

31.55 inches (801.37 mm) wide

M2

M2

M2

M2----F30 30 Slot Frame

F30 30 Slot Frame

F30 30 Slot Frame

F30 30 Slot Frame

42.75 inches (1085.85 mm) wide

Meter Bridge (CL-Meter)

A hardware LED Meter Bridge is available as an option. The Meter includes two high-resolution
meters – one for Program bus and one switched.

TIP:

If the Mosaic is powered on without being connected to the JetStream, no meter
LEDs will illuminate. This is normal operation; the center dot LEDs will turn on after
being connected to the JetStream and the rest of the LEDs will light as console
begins to receive meter data.

Mounting

Mounting

Mounting

Mounting

The Meter option is supplied separately and attaches to the back of the Mosaic frame with
screws (included).

The RJ-11 cable from the Meter plugs into the Mosaic tray card at the far right into the jack
labeled “Meter.”

The Meter is hinged. Gently tighten the black center screw on the rear of the hinge to lock
the meter into place at the desired angle.

Advertising