Meradiso Air Bed - Manual (Page 13)

15 GB/MT
Maintenance / Cleaning and care / Disposal

Place the repair patch 3 onto the damaged part.

Press the repair patch firmly down onto the
leak. You may have to place a heavy object
onto the relevant area.

Wait for 24 hours before you pump up the
product again.
 Cleaning and care

Do not under any circumstances use corrosive
or abrasive cleaning agents. These may dam-
age the surface of the product.

Clean the flocked surface of the product using
a brush.

Clean the plastic surfaces with water and / or a
little mild soap solution.

Do not expose the product to extreme weather
conditions such as extreme temperature, wind
and rain.

Do not allow the product to be subjected to frost.

Ensure that the inside and outside of the product
are completely dry if you intend to store it indoors
for a long period. Failure to observe this advice
could result in the build-up of mildew and mould.

Fold up the product with the flocked surface on
the inside.

Store the product in dark, dry place – out of
reach of children.

The ideal storage temperature is between
10 and 20 °C.

Make sure that the stopper 1 is shut if you
want to store the product for any length of time.

Do not allow sharp objects to come into con-
tact with the product while it is in storage.

Never powder the product with talcum.
 Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
61897_mer_Luftbett_Content_LB5.indd 15 20.01.11 15:09