Ergotron CRT Monitor - Manual (Page 15)

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 15
97-097-099
CPU Holder Suspension Arm
Bracket for
Arm to Post
Install peripherals at any
height on post
CPU Holder
Bracket for
Peripheral to
Post
Example of multiple
Extender Arms mounted
using 97-096-099 Example of multiple Suspension
Arms mounted using 97-095-099 Example of CPU
Holder mounted
using 97-097-099
Mounting Systems
Mount a second component to the 3" x 3" or 4" x 4" Post Brackets by ordering one of these
Fastener Kits.
Part Description
Number
97-095-099 Fastener Kit, Suspension, Lift or Fixed Arm
97-096-099 Fastener Kit, Extender Arm
97-097-099 Fastener Kit, CPU Holder
Note: When mounting Extender Arm or multiple monitor arms to Command Post, use 4" x 4" Post only.
Second Component
Fastener Kits for
Command Posts
Peripherals require a bracket (unless noted otherwise) for mounting to a Command Post. Order
brackets according to the post size to which you are mounting.
Part Description
Number
60-157-000 Bracket for Peripheral, 2" x 2" Post
60-158-000 Bracket for Peripheral, 3" x 3" Post
60-159-000 Bracket for Peripheral, 4" x 4" Post
Note: See the selection of available peripherals on pages 19–21.
Note: If you plan to mount a monitor arm and peripheral on the same bracket, order Bracket for Arm to Post (previous
page) and Fastener Kit #97-097-099 (above).
Brackets for Mounting
Peripherals to
Command Posts