Livarno Z29526C - Manual (Page 6)

6 GB
Safety advice / Assembly
CAUTION! DANGER OF INJURY! Please ensure that no parts are damaged and that
all parts are correctly assembled. Incorrect assembly or fitting may lead to injury. Damaged
parts can adversely affect safety and proper function.
CAUTION! Do not leave children unattended. The product is not a climbing frame or toy.
Make sure that nobody, especially a child, lifts themselves up by the product. This may
result in injury and / or damage.
Make sure that the product is only assembled by competent persons.
Please check the stability of the product before use.
You should perform regular checks to ensure that all connections are intact and tighten the
screws at regular intervals.
Prevent damage to property!
Before assembly, check that the selected door is suitable for mounting the product to.
You may have to consult a specialist.
Before assembly, find out about suitable assembly material for your door. For the purposes
of the assembly, we have included assembly material that is suitable for conventional doors.
Assembly
Push the spindle 1 through the follower (see Fig. A).
Note: Please note that the recess in the spindle must point downwards.
Push the drilling template over the spindle 1 and align it vertically (see Fig.
).
Note: Make sure that you use the correct drilling template for the model in question.
CAUTION! RISK OF INJURY! Consult the directions for use that came with your drill.
Now drill the holes for the supporting cams at the places marked.
Repeat this step on the other side of the door.
Now place the door handle and plate
2 onto the spindle 1 (see Fig. B).
Place the threaded bushing 4 into the pre-drilled holes on one side of the door (see Fig. B).
Note: the following working step applies for alternative mounting options only.
Secure the door handle and plate 2 into position by turning the screws 3 into the
threaded bushings 4 using a crosshead screwdriver (see Fig. B).