Silvercrest SMS 5.0 A1 - Manual (Page 23)

SilverCrest SMS 5.0 A1
English - 21
Playback
You start playback mode by pressing the Playback button [5].
If the following message is displayed on the screen [8] after pressing the Playback button [5], there
are still no images on the memory card.
You must first create recordings to be able to
view them in playback mode. In this case,
please read the section "Recording" on page
17.
The stored recordings are then displayed automatically in sequence in a slide show. Press the
OK/Capture button [3] to stop the slide show. You can then browse through the recordings
manually by pressing the button Right/Colour [14] or Left/ EV [16]. Press the OK/Capture button
[3] to start the slide show again.
Press the Mode button [4] twice in playback mode during the slide show or press it once if the slide
show has finished. The following options are available here:
36 Rotate 90° clockwise
37 Rotate 90° anti-clockwise
38 Delete
Press the Mode button [4] to exit the menu. If changes were made to the image, these are
automatically applied when exiting the menu. To exit playback mode, press the Playback button
[5]. The device is now in record mode again.