Т³гж 5, Sleeping to radio, Listening to radio operating the alarms – Mpman FRA200 User Manual
Page 5
8
7
Sleeping to Radio
This unit features a radio sleep timer which can be programmed to play the radio for a set amount of
time(maximum 90 minutes) before automatically turning off.
1.
During `RADIO` playing, press the SLEEP button to switch on the sleep timer. The `SLEEP` LED
indicator will light on.
2.
Press & hold the SLEEP Button more than 2 seconds to select the desire sleep time cyclically from 90,
80, 70 ..... to 1 minute.
3.
To cancel the SLEEP function, press the SLEEP button again, the 'SLEEP' LED indicator will light off.
90
80
70
60
50
40
30
20
10
UP to 1 MIN.
ANTENNA
FM
For FM reception there is a built-in FM antenna wire at the rear of the unit. Unravel the wire and move it
around to obtain the best reception.
MW
The MW bar antenna is inside the cabinet. To improve MW reception, you may have to move or slightly
rotate the main unit until you obtain in best reception.
Listening to Radio
Operating the Alarms
Setting the Sound of the ALARM 1 and ALARM 2
Press the `ALARM 1` or `ALARM 2` button to set the sound of the alarm.
1.
Press the `ALARM 1` button once, the `ALARM 1` of RED LED indicator will light on, and the sound of
`ALARM 1` in `BUZZER`.
2.
Press the `ALARM 1` button again, the `ALARM 1` of YELLOW LED indicator will Light on, and the
sound of `ALARM 1` in `RADIO`.
3.
To cancel the `ALARM 1` , press the `ALARM 1` button again, the `ALARM 1` LED indicator will light
off .
4.
Repeat the above steps 1 to 3 to set the sound of the `ALARM 2`.
ALARM setting
1. Press & hold the ALARM 1 button more than 2 seconds, the `HOUR`& `ALARM 1` LED indicators will
flash and then press the Time Set `UP` or Time Set `DOWN` Button for hour adjustment.
2. Press the ALARM 1 button to confirm the Hour set. Then, the `MINUTE` & `ALARM 1` LED indicators
will flash and then press the Time Set `UP` or Time Set `DOWN` button for minute adjustment. Press
the ALARM 1 button again to confirm the `ALARM 1` setting.
3. Press & hold the ALARM 2 button more than 2 seconds, the `HOUR` & `ALARM 2` LED indicators will
flash and then press the Time Set `UP`or Time Set `DOWN` button for hour adjustment.
4. Press the ALARM 2 button to confirm the Hour set. Then, the `MINUTE` & `ALARM2` LED indicators
will flash and then press the Time Set `UP` or Time Set `DOWN` button for minute adjustment.
5. Press the ALARM 2 button again to confirm the `ALARM 2` setting.