Load originals, Document loading tips – HP ScanJet Pro 2000 s1 User Manual
Page 22
Load originals
The following topics describe how to load originals into the input tray.
●
●
Supported paper sizes and types
●
●
Document loading tips
●
The maximum capacity of the input tray is 50 sheets of 75 g/m
2
(20 lb) paper. When using heavier
paper, the maximum capacity is decreased.
TIP:
Use the lines on the input tray paper guides to help you to not exceed the input tray capacity.
●
The maximum name card capacity is approximately 9 or 10 cards. For rigid cards, bank cards, and
embossed cards, load only one card at a time.
●
Be sure that original documents are within these guidelines:
Width:
51 to 216 mm (2 to 8.5 in)
Length:
2000 s1: 51 to 3100 mm (2 to 122 in)
3000 s3: 74 to 3100 mm (2.9 to 122 in)
Weight:
2000 s1: 50 g/m
2
(13 lb) to 180 g/m
2
(48 lb)
3000 s3: 40 g/m
2
(10.7 lb) to 413 g/m
2
(110 lb)
●
Scanning the following types of documents might result in paper jams or damage to the documents.
Wrinkled or creased documents
Curled documents
Torn documents
Documents with paper
clips or staples
Carbon paper
Coated paper
Extremely thin, translucent paper
Paper with adhesive
notes or flags
attached
14
Chapter 2 Use the scanner
ENWW