Iiyama xub2792hsu - Manual (Page 18)

ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
 Signal Timing
Change to the desired signal timing listed on page 35: COMPLIANT TIMING.
COMPUTER SETTING
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XUB2792HSU
 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
 You are able to adjust the monitor's height up
to 130mm, angle up to 45° right and left, 22°
upward and 5° downward.
 Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
 Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.
 Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.
NOTE
Monitor
Stand
45° 45°
130mm