SPL DMC Mastering Console (Black) - Manual (Page 14)

12
Rear Side: Connections
Multichannel Monitoring with the MC 16
You can pair the DMC with the SPL MC 16 (Multichannel Mastering Monitor Controller)
for surround and immersive audio applications. This way, Dolby Atmos® or Auro 3D®
projects can be realized. The MC 16 is world’s first analog 16 channel monitoring con-
troller. Mastering studios often use the L/R speakers and the subwoofer for stereo and
multichannel monitoring. The combination of DMC and MC 16 makes replugging of the
speakers redundant and allows their application in all fields.
L/R from MC 16
The stereo input L/R from MC 16 (balanced, female XLR) serves to feed the L and R signal
of the MC 16 into the DMC for stereo mastering applications. Through this opportunity to
pair the DMC and MC 16, loudspeakers L and R of the stereo mastering configuration can
also be used in surround applications with the MC 16.
LFE from MC 16
The mono input LFE from MC 16 (balanced, female XLR) serves to feed the LFE signal of
the MC 16 into the DMC for stereo mastering applications. Thereby it is possible to use the
subwoofer, which is connected to the Sub output in surround mode, in combination with
the MC 16 as LFE loudspeaker.
L/R to MC 16
The stereo output L/R to MC 16 (balanced, male XLR) sends the L and R signal of the DMC
to the MC 16.
The image on the following page shows a suggestion for the pairing of DMC and MC 16.
Find further information about the MC 16 on the product website: mc16.spl.audio