StarTech.com 300 Mb/s PCIe 802.11 b/g/n Wireless Network Adapter - Manual (Page 13)

Instruction Manual
10
4. Select the type of Authentication/Encryption used by the network (if any). Click the
‘Next’ arrow button when ready.
5. If an Authentication type was specified, enter in the password/passphrase used to
access the network. Click the ‘Next’ arrow button when ready.
6. Once the profile has been created, you must activate it for it to become the default
profile. Select the profile and click the “Activate Profile” button. The wireless adapter will
automatically try to connect to the default profile every time you log into the computer.
Wi-Fi Protected Setup (WPS)
WPS can be used to quickly and easily setup a secure wireless connection to a WPS-
enabled wireless router/access point (AP). The WPS configuration section can be
accessed via the Profile List window.
Select the method of configuring the WPS connection (push button or PIN code) and
select the WPS-enabled AP from the list of detected networks. Click the ‘Next’ arrow
and proceed with the remainder of the setup.
WPS Configuration