Erica Synths EDU DIY EG Eurorack Module Kit - Manual (Page 3)

BILL OF MATERIALS
Before we start, please check if your kit contains all of the necessary components. In
addition to a PCB, panel and power cable, your box should also contain:
An array of resistors . The specific values (in ohms,
which you should check for with a multimeter) are
100k x10
47k x1
10k x1
1k x2
470 x1
100 x1
10 x2
A few capacitors . The specific values (which are
printed onto their bodies) are
47 µF (electrolytic) x2
1 µf (1J/film) x2
100 nF (104/ceramic) x8
Some diodes . The specific model names (which are
printed onto their bodies) are
SB140 (schottky) x2
1N4148 (signal) x6
A transistor . The specific model name (which is printed
onto its body) is
BC548 (NPN) x1
3