Erica Synths Pico Sequencer Eurorack Module (3 HP) - Manual (Page 2)

The 7 segment display indicates
selected steps, gate length, notes and
play mode
The top encoder allows you to access
main features and modes of the
module. Push the encoder promptly
and move through controls.
All functionality of the unit is
described in the table below.
This encoder sets parameter values
for each step. Push the encoder
promptly to move through controlls
and access different features.
Patch the external clock here. The
sequence will start automatically
with the first clock pulse. You can
reset the sequencer to the first step
manually. Push and hold L/S button
and push RND promptly.
A CV output
A Gate output
RND button randomizes patterns and
allows to access few cool features.
Refer to the table below.
PICO
SEQ
Load/Save button activates pattern
saving or loading.
Also use it to RESET the sequencer to
the first step. To do so, push L/S
button and then RND button promptly.
CLK IN
GATE
STEP
VALUE
CV
PICO
SEQ
L/S RND