Maintenance firmware upgrade technical data – Godox AD600BM Witstro Manual All-In-One Outdoor Flash User Manual

Page 12

Advertising
background image

- 43 -

- 44 -

This flash supports firmware upgrade through the USB port. Update information will be released on our
official website.

USB connection line is not included in this product. The USB port is a standard Micro USB socket. Common

USB connection line is applicable.

● Shut down the device immediately should abnormal operation be detected.

● Avoid sudden impacts and the product should be dedusted regularly.

● It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary.

● Maintenance of the flash must be performed by our authorized maintenance department which can provide original

accessories.

● This product, except consumables e.g. flash tube, is supported with a one-year warranty.

● Unauthorized service will void the warranty.

● If the product had failures or was wetted, do not use it until it is repaired by professionals.

● Changes made to the specifications or designs may not be reflected in this manual.

Maintenance

Firmware Upgrade

Technical Data

Model

Flash Mode

Guide No. (m ISO 100)

Flash Duration

POWER

Power Output

Stroboscopic Flash

Sync mode

Delay Flash

Mask

Fan

Beeper

Modeling Lamp (LED)

Optical Slave Flash

Flash Duration Indication

Display

• Wireless Flash (2.4G transmission)

Wireless Flash Function

Controllable Slave Groups

Transmission Range (approx.)

Channels

• Power Supply

Power Supply

Full Power Flashes

Recycle Time

Battery Indicator

Power Indication

• Sync Triggering Mode

• Color Temperature

• Dimensions

Dimension (with battery)

Net Weight (with battery)

AD600BM

M/Multi

87 (m ISO 100, with standard reflector)

1/220 to 1/10000 seconds (T0.1)

600W

9 steps: 1/256~1/1

Provided (up to 100 times, 100Hz)

High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync

0.01~30 Seconds

10W

S1/S2

Dot-matrix panel

Slave, Off

5 (A, B, C, D, E)

80m

32 (1~32)

Lithium battery pack (11.1V/8700mAh)

500

Approx. 0.01-2.5s

Power off automatically after approx. 60 minutes of idle operation.

3.5mm sync line, wireless control port

5600±200k

220x245x125 mm (flash tube & reflector not included)

2.69 Kg (flash tube & reflector not included)

Advertising