Impact Digital Monolight 400W/s (120VAC) - Manual (Page 2)

2
Thank you for purchasing the Impact VS-LCD Series Studio Strobe. This
light incorporates numerous advanced features, and was designed to
provide many years of trouble-free service. Please read these operating
instructions and safety precautions carefully before operating this
equipment.
Features
• A tactile, “grippy” feel that resists slipping and shock damage
• Cushioned “touch-pad” function control buttons
• Liquid Crystal Display
• Five Stop Range – full power to 1/16th power in .10 f/stop increments
• Red Eye Reduction function
• “Auto Dump” excess power release circuitry
• User-replaceable flash tube
• Commonly available 1/8” mini plug flash sync input
• Universal IEC C13 type computer power cord
• 7˝ grid reflector
• Voltage: 100-120V 50-60Hz
• Built-in optical slave
Power Requirements
This light is designed for use with 110/120V AC power only, and is supplied with a
3-prong, grounded plug. Do not attempt to defeat this safety feature. If necessary, use
only grounded extension cords rated for 10 amps or greater.
Warning
There are no user-serviceable parts inside the unit. Only qualified service engineers
should access the inside of the case (Danger – high voltage parts inside). Avoid damage
to both the flash tube and modeling lamp. If the modeling lamp becomes cracked or
damaged in any way, it should be replaced immediately. Do not use your flash unit in an
environment where moisture or flammable vapor is likely to come in contact with the unit.
Turn the power off and unplug the power cord when the unit is not in use. Always remove
the modeling lamp and replace the protective cap when transporting the unit. Avoid
strong light falling onto the slave cell as it will prevent efficient operation. If the strobe
blows a fuse, a replacement fuse can be inserted in the pull-out compartment on the
back of the unit. To ensure long life of the flash capacitors, the flash unit should be
powered up and fired several times at least every two months.
Page 2 Page 15
One-Year Limited Warranty
10M 25M 50M 75M 100M 10Y 25M 50M 75M 100M