Datavideo CM-10 Ceiling Mount for PTR-10 Mark II & PTR-10T Mark II Pan/Tilt Heads - Manual (Page 5)

5
Introduction
CM-10 is a ceiling mount designed for PTR robotic pan tilt head,
securing your PTR robotic pan tilt head to the ceiling.
Parts Assembly and Installation
In this section, you will be shown how you can assemble and install
your CM-10.
Pre-work
1. First check you have all the parts listed in the table below.
Note: There is a bubble level meter on the ceiling bracket A.
No. Part Names Qty
1 Ceiling Mount Bracket A 1
2 Ceiling Mount Bracket B 1
3 Camera Mount Arm 1
4 Expansion Bolt 6
5 M3 x 6mm Screw (Silver) 2
6 M3 x 6mm Screw (Black) 4
7 M4 x 8mm Screw (Black) 4
8 M4 x 9.6mm Screw (Silver) 3