Austrian Audio Hi-X25BT Professional Wireless Bluetooth Over-Ear Headphones - Manual (Page 7)

My Hi-X25BT is continuously blinking rapidly:
 Your headphones indicate that they are waiting to establish a Bluetooth® connection for the
first time. Please set your Bluetooth® source into pairing mode to set up a connection.
My Hi-X25BT says „Battery low” in regular intervals:
 Your headphones’ battery is getting low: please charge it via a USB port.
Sometimes my Hi-X25BT does not react at all or not as expected to the capacitive controls:
 All control functions do only work in Bluetooth® mode. In USB mode, some functions might
be
supported, some not, depending on the source device – your Hi-X25BT cannot influence that.
 Please do not operate the Hi-X25BT with wet hands.
 Please clean the sensor surface from possible contamination or water drops.
My Hi-X25BT does not even work in passive mode:
 To let your Hi-X25BT know that it’s time to play in passive mode, it’s necessary to provide
some residual energy on the jack cable. Usually, the battery’s residual voltage is sufficient
even if it’s not enough to play in Bluetooth® mode anymore. Please recharge your
headphones for a short (or longer) time.
My Hi-X25BT does not play any music via USB cable:
 Please make sure your headphones are not in Bluetooth® mode. Press the on/off button
briefly to switch into USB mode.
My Hi-X25B does not play any music via Bluetooth®:
 Please make sure your headphones are not in USB mode. Press the on/off button shortly to
switch into Bluetooth® mode.
 Please make sure that the Bluetooth® function on your source device is activated. Depending
on the operating system, the playback function might be paused by interactions (e.g.,
accepting/declining a call).
I have plugged in my Hi-X25BT on the source via USB cable; it is detected and shown by the source
device, but it does not play any music:
 Please turn on your headphones deliberately.