Vicoustic Vixagon VMT Acoustic Panels (Blue, 27.5 x 23.8 x 0.78", 12-Pack) - Manual (Page 3)

Measure the desired
distance between panels
and apply the remaining
panels.
A
B
Wall and ceilling surfaces should be examined prior to
installation, ensuring they are clean, smooth, and dry. If you have
unpainted gypsum board surfaces, these should be primed with
a drywall primer (or another material manufactured especially
for the purpose), to equalize the absorption between the gypsum
board face paper, joint compound, and skin coating materials.
You should then apply the paint, and allow air circulation in order
to dry the paint within the time frame specified by the paint
manufacturer. Please ensure the paint is dry before installing
the acoustic panel. Make sure the room has all the necessary
conditions to receive the acoustic panels. After you apply the
glue on the back of each acoustic panel, please ensure you hold
the acoustic panel against the wall the required time (mentioned
above), and ensure it stays fixed in place. This method is also
applicable to ceiling installations.
For the installation of Vixagon VMT
on the ceiling, we recommend using
Flexi Glue Ultra.
To ensure that you maximise the
strength of the glue, don’t make
any adjustments to the panel after
bonding.
!
Do not apply VixagonVMT behind
radiators or too close to a heat
source.
EN Place the panel on the suitably
chose position on the wall. Once
in the desired place, press firmly
against the wall for 15 seconds.
3
Velcro stripes
1 2
Apply the Glue on the back of the
acoustic panel, near
the edges. Do not wait longer than
10 minutes after applying the glue
to attach the panel to the wall.