JBL CSR-2SV Wall-Mounted Remote Control for CSM Mixers (White) - Manual (Page 7)

5
Specifications
Connector: RJ-45
Cable type: Category 5, straight-through cable, T568B standard
Maximum Cable Length: 1000 ft. (305 m)
Shipping Weight: .55lbs. (250g)
Trouble-shooting
Problem 1: The green LED on the remote control below the Source
switch (labelled ACTIVE) can not be lit.
Solution: In normal cases, the P11 jumper on the PCB can not be
accessed by the user for any operation, yet is removable for disabling
the LED. If the LED is not lit, you may check the P11 jumper is installed
properly.
Problem 2: Malfunction between the remote control and the mixer
occurs.
Solution: Check the cable and pins with the following definitions.
RJ-45
(8-Position)
Color CSR-V CSR-2SV/CSR-3SV
Pin 1 White/Orange +VREF 3.3VDC +VREF 3.3VDC
Pin 2 Orange Volume Control Volume Control
Pin 3 White/Green Not used Source Selection
Pin 4 Blue Not used LED (+2.8VDC)
Pin 5 White/Blue Not used Not used
Pin 6 Green Not used Not used
Pin 7 White/Brown Not used Not used
Pin 8 Brown Ground Ground