Sanus Systems Advanced Tilt 4D Premium TV Wall Mount for 42 to 90" Displays - Manual (Page 10)

10
ADJUSTMENTS
To level your TV, turn the level
adjustment screw
S on the top of
either TV bracket 04 / 05 to raise or
lower that respective side of the TV.
Adjust the height by turning the level
adjustment screw
S on the top of
both TV brackets 04 / 05 .
LEVEL
HEIGHT
S
RAISE
LOWER
TILT
Your TV should adjust easily when moved,
then stay in place.
Adjust the tilt tension knob
T if your TV
naturally tilts up or down.
NOTE: If you do not intend to adjust the
tilt for different viewing locations, you can
tighten the tilt tension knobs
T to prevent
unwanted movement.
T
CAUTION: Avoid potential personal injury or property damage!
For Concrete Applications , TV brackets 04 / 05 must be centered between the marks on
the wall plate rail 07 .
For Wood Stud Installations ONLY: Slide the TV left or right along the wall plate 07 to
reposition.
SIDE-TO-SIDE SHIFT
HEAVY ! You may need
assistance with this step.
05
05
05
04
04
04
10
07
10
S
RAISE
LOWER
10
Align the brackets between
the two lines on the wall plate
for minimum profile depth.